Lubrication
Slip 2000 EWL
has incorporated advanced technology additives to enhance film strength
and anti-wear properties. Penetrating the pores and bonding its self
to the surface of the metal through physical absorption reducing
surface tension thereby reducing friction between moving parts and
minimizing wear and the build-up of wear related debris.
Slip
2000 EWL will not dry out or attract dust or dirt particles like
petroleum products. Even when surface is wiped dry to the touch Slip
2000 EWL is still present and lubricating the metal parts from within
the pores of the weapon. This product does not require a liquid carrier
to be present for protection. Slip 2000 EWL does not evaporate off
because there are no carriers needed for continued protection.
Cleaning
Slip 2000 EWL provides additional protection through additives that in
addition to the ability to penetrate between metal surfaces, it will
also aid in the effective removal of built up dirt, lead, copper,
carbon, corrosion particles and firing residues that can buildup and
become abrasive to both recoil and gas operated mechanisms.
Preservation
After cleaning, a micro thin film of our enhanced preservative
immediately bonds itself and forms a barrier film on the surface that
displaces water and provides a corrosion resistant barrier against rust
and dirt. It is designed to give protection against hydrogen sulfide
(H2S), mild mineral acids, carbon dioxide (CO2), saltwater and brackish
environments, musky water, chlorine and similar adverse environments
and has passed the Salt Spray Corrosion (ASTM B-117) 150 Hour test.
Additionally a barrier of protection is formed to protect against all
other fouling of lead, carbon, copper and plastic wad.
Applications
Slip 2000 EWL is formulated to meet the complete requirements of
cleaning, lubricating, and preserving both small and large caliber
weapons in virtually all climate conditions. Apply to weapons metal
surface liberally on first application. Allow to penetrate surface on
first application approximately 5 to 10 min. Wipe excess lubricant from
surface to leave a dry surface to the touch. This will also help when
it comes to dirt not sticking to a dry weapon. As weapons are used and
heat up the Slip 2000 will penetrate even deeper into the pores of the
metal. On second cleaning these pores will fill in with additional
Lubricant and a new protective barrier will be formed making the second
cleaning much easier and faster.
Specifications
Slip 2000 EWL meets most and exceeds requirements of MIL SPEC: MIL-PRF-63460D (6)
Kinematics Viscosity (ASTM D445) -59° F...Pass
Falex Load Carrying Capacity (ASTM D3233) +4500 lbs...Pass
Corrosion Test (ASTM-B-117) 150 Hr...Pass
Rust Resistance (ASTM D-665) Test A...Pass Test B...Pass Modified Test C...Pass
Automatic and rapid firearm users will see
- Increased pattern consistency
- Increased bolt action
- Increased Muzzle velocity
- Increased distance
- Decreased recoil, friction, heat and wear
- Decreased Malfunction or jamming
Additional benefits
- Will not attract dust, dirt or sand like petroleum products
- Will not harden or become tacky
- Will not dry out and leave unprotected metal behind
- Will reduce cleaning frequency
- No need for 5 or 6 other potential dangerous cleaners
- Contains No Petroleum distillates or other toxic ingredients
Simple to use
Apply to all moving parts of the mechanism and all parts that require lubrication and / or protection from corrosion.
ALWAYS MAKE SURE YOUR FIREARM IS UNLOADED BEFORE STARTING YOUR CLEANING PROCESS.
